Step by step layout

Cedric

Photo: one 4" x 6" landscape photo

Uses: Creative Imaginations - Old Guys Rule

Black, white and red cardstock

adhesive backed embossing foil

red mesh ribbon or 2" wide sequin waste

brads, cog, wire

title stickers

Instructions:

1. Cut foil to the size of embossing plate. Emboss and lightly swipe Staz On ink over raised bits. Attach to white cardstock 1" in on the left 4 3/4" down from the top sideways.

2. Cut patterned paper to 7" wide and tear the bottom edge so it is 7 1/2" to 8 3/4" long. Ink and curl edges. Attach 1/2" in from right edge 2" down from the top of white cardstock.

3. Attach mesh across layout 5 1/2" down from the top. I used staples and tape to secure.

4. Double mat phot with cream then black cardstock. Distress edges. attach 3 1/2" in from the left edge and 3 1/2" down from the top.

5. Attach title to 1 1/4" wide strip of red cardstock and attach to piece of chipboard for dimension. Ink edges and attach overlapping bottom corner of photo.

6. Cut 3" x 1" piece of red cardstock and chipboard. Attach and ink edges. Cut out car from patterned paper and attach with tape and 3D dots where it overhangs block. Embellish block with brads, cog, wire and attach to top corner of layout.

7. Cut narrow strips of red cardstock for journalling. Ink edges and attach 7" in from the left under patterned paper. Ink edges aof layout.

Altering Die Cut Papers with June Burtonwood

"Change is inevitable - except from a vending machine."

Die cut papers are great to use if you want a change from straight edges. You can use them as is, cut them into section and change the positions or simply ink, mist or spray them. I love the distressed look so today I'm sharing ways of altering a diecut paper for an aged tattered look.




Products Include.

• Collage Press die cut paper, 
• brown Mesh, 
• kaiser wood flourishes, 
• Ruby Rock-it chipboard alphabet, 
• Ruby Rock-it ATC cards, 
• die cut chipboard leaves, 
• metal flowers.
• Kraft Cardstock
• Distressed ink which are 39% OFF AT THE MOMENT!!!

1. On this layout, My Regret, I cut out an inside shape - a circle in my case. Distressed all the inside and outside edges. Because my paper was a dark colour I left the white edges but you could also ink them.
2. The reverse of most die cut papers is white so to add interest on the bits I was curling over I stamped a small script stamp that gave it a pattern - you could also ink in a matching colour. Then I tore and curled over the edges revealing the script.
3. My biggest tear gave a spot to embellish in matching net - lace, flowers etc would also work well.
4. I only removed a few of the punched out dots and curled up the scalloped edges. You could add your own random holes if the paper didn't have any.
5. Before attaching the inside and outside pieces I made sure they were distressed enough for the background cardstock to show through.
6. I could also have scrunched up and inked the paper. Another way of distressing the paper would be to sand it like I did the painted chipboard leaves and photographs.
7. Try to vary the distressing techniques you use over all in your layout. Using the same on everything isn't as interesting. I have used sanding, inking, tearing, curling and edge distressing.

enjoy
June

Third Thursday Techniques: Using Metal Embellishments ( like brads, charms, eyelets, clips and metal words)

Ingeborg Dijkstra
Tanyah asked us to show some layouts and ideas on how to use metal embellishments. A few years ago you saw them everywhere and most of us probably have a few (or a lot) in our stash somewhere. I don't use them a lot, so I was really challenged to create some layouts with different embellishments.

I made four picture collages to show your four different way of using metal embellishments:

1. charms
2. brads
3. a charm with words on it
4. eyelets

On the layout below (just click on it to see the picture better) I used three butterfly charms as a sort of border. I used different sizes of patterned brads (these are from KaiserCraft) on these pages. I also used some metal leaves for more decoration:
On this layout I used a metal charm with the words 'with love' at the bottom right of my layout. These sort of charms will also work really well on cards:


On this layout I used eyelets as a part of the design. I wanted to add a circle to my layout and instead of stitching or using paper, I chose to punch a lot of little holes and I added eyelets to it:

*************************************** 

Melinda Spinks

I can't say that I've ever played around with too many metal embellishments other than the standard 'eyelets' and brads. However, I have really fallen for embossing and etching of metal sheets as the possibilities are endless.
I recently made a card using gold and silver sheeting that I put through my little embosser and created some really funky patterns. The sheeting is also thin enough to pierce and sew and any old double sided tape works wonders for sticking it to your projects.

During last year's 'Embellish It' competition I made a little chipboard album that I covered in pieces of hand-etchd milo tin foil which was fun to do and really made a unique piece for my project. I've since learnt that Tanyah sells the metal sheeting so I don't need to drink so much milo.

*************************************** 

Nicky Amber

I haven't used a great deal of metal embellishments in my projects in the past, I think mainly because it hasn't matched the colours I have been using.  One suggestion I can make is that if you want to get more use out of your metal embellishments is......try using alcohol inks.

Here I have coloured some metal dragonflies with different shades of alcohol inks.

 Here I've used the coloured dragonflies in a card.  I think they tie in much better than they would if they were left as is.

 

 If you don't have any metal embellishments but like the look, you could try making your own faux metal embellishments.  To make this 'metal' heart, I used some jac paper and some kitchen aluminium foil then coloured with alcohol inks.

Firstly, I peeled off one side of the jac paper and attached it to alfoil (if you want the embellishment to be sturdier you can place the jac paper onto some cardstock).  Peel off the other side of the jac paper and place some more alfoil on top.  Trim excess foil away then cut out whatever shape or letter you desire.  You can then colour with alcohol inks or leave as is.

 Happy creating...xxxooo

**********************************************************

Alison Callcot

"I love metal embellishments, have a somewhat large stash of them, keep buying them (everything from brads and photo

anchors to old keys and handles), but find that I tend not to use them so much in my scrapping (layouts) these days. I think

(hope LOL!) its just a phase I'm going through. But when it comes to OTPs I simply cannot get enough of my various metal

embellishments. I recently altered an empty Forrero Rocher box of chocolates for a swap. Actually I was having so much fun

I altered two! The one I titled "Tim Holtz Junkie" I kept.

Loving my metal like I do how could I possibly let this go?? The Forrero Rocher chocolate box turned out to be quite

versatile for altering and handled being drilled very well. This enabled me to attach (for example) various metal items with

brads (more metal!!) and also screws (as in the 7Gypsies book knob). The only problem with the brads though was that they

lacked the strength (for the most part) to hold the heavier metal objects secure. To overcome this I adhered some plain

acetate to JAC paper and die-cut circles which I then used as 'bandaids' (LOL) to hold the brads secure on the inside of the

box. It worked a treat and is barely visible. Other metal was easily adhered with Glossy Accents Inkssentials which set very

quickly. I could have altered the look of the metals with paint, sanding, alcohol inks etc, but decided to leave it as is. Can

you guess what I'm going to use this altered box for? Yep you got it ... storing more metal!!!"

Here is the list of 'metals' I used on this project should you choose to use it:

- 7Gypsies Pewter Book Knob - Black Noir

- Making Memories alpha tiles

- CK OK brads

- Accentz dragonfly brad

- Tim Holtz Idea-ology - Jump Rings

- Tim Holtz Idea-ology - Mini Pins

- Tim Holtz Idea-ology -Trinket Pins

- Tim Holtz Idea-ology -Philosophy Tags

- Tim Holtz Idea-ology -Keyholes

- Tim Holtz Idea-ology -Swivel Clasps

- Tim Holtz Idea-ology -Sprocket Gears

- Tim Holtz Idea-ology - Long Fasteners

- Pewter altered art charms

Thanks alz for sharing this with us it is absolutley brillant xx

***********************************************************

Tanyah Payne

Metal embelishments can be from the 7 gypsys pins to brads/eyelets and so many different possiblities. Making false metal is tones above as nic has created above.

What i love about brads are you are able to create a shape with them  not only a bracket but create a swirl or place them in the centre of your flowers... The other cool thing about brads are you are able to change the colour of what you have using ALCOHOL INKS as in nics example above or using EMBOSSING POWDERS by weting the brad with versamark and than dabing into the powder. Holding your brad with safety tweezers and heating. The other way is the new product out now called SMOOCH

 We have in our store lots of different shaped metal brads for you to enjoy! to see more CLICK HERE!

  

Their are many differnt metal embelishments just for decoration.

 Their are many many more if you want to check out what else their is check out our shop today! CLICK HERE!

 Thanks heaps for reading and hope this info has helped you with metal embellishments and what your able to do with them...

enjoy

luv tanXx

Technque using Twinkling H2O's

Here is some ideas on how to use twinkling h2o's I have used 4x4 canvas, doodlebug cardstock, stampit stamp, CI ribbon, Prima flowers and vareity of rubons and ribbons.

• I have painted the paint of the Twinkling H2O's onto the canvas,
• Stamped using the cream of the Twinkling H2O's,
• Painted using differnt colours and adding glitter.
• Coloured the ribbon,
• Twinkling H2o'ed over the metal
• and Twinkling H2O'ed the wood 'B'
  

WE ARE TAKING ORDERS
IF YOU ARE WANTING ANY OF THE
TWINKLING H2O'S.

The below canvas is one I am is a work in progress and yet to be finished but wanted to share where I am up to with it!

Here I have used the Twinkling H2o's paint and cream. Then I have placed a mixture of rubons, ribbon, magic mesh and stamps to give this look!

Thanks for looking and hope I have enspired you to create your own twinkling projects! xox